Not a good product. Didn’t work as advertised . Just my opinion. A lot of money for a little bottle that doesn’t work.
Amazing. Actually works bypass over only one time do not go over continuously will dull or create haze look ..
This product is intended to make the clear coat of older cars look 60-90% better. We recommend using this product in the following ways:
a. Only on the exterior of a vehicle
b. On panels that are between 50-110°F
c. In environments of less than 90% humidity
d. In a well-ventilated area
e. While wearing gloves / masks / PPE
f. Keeping vehicle dry for 24 hours after applying
g. Practicing on a small panel of a car first before doing an entire vehicle
1. Prep / Wash
2. Application
*** Please note, if there is a significant mistake made in the application of your coating and you need to remove it – stripping the coating is much easier within 15 minutes of initial application. If you need to remove the application in that 15 minute window, we recommend scrubbing the coating with Wax and Grease Remover. If you need to remove the coating after it has already cured, you will need to wet sand/heavy cut with a rotary/elbow grease with a heavy solvent. This is a long-lasting coating.
3. Curing / After-Care